emc and power quality > approvals features and benefits fn3416 (50hz) and fn3418 (60hz) models of the ecosine? product family represent the very compact economy line of load-applied passive harmonic flters. they are ideal for non-linear three-phase equip - ment with b6 rectifer front-end that do not re - quire the industry leading performance provided by schafner ecosine? fn3410/12 flters. the performance, however, is still sufcient to comply with en61000-3-12 (for thd) or with ieee- 519, table 10-3 (for tdd). schafner ecosine? flters help to unburden the electrical infrastructure from excess loading and heat caused by current harmonics, and therefore support a better utilization of electric system capacity. lower harmonics also reduce the risk of system resonances and potential downtime of sensitive electronic equipment. fn3416/18 flters upgrade standard motor drives to low-harmonic drives quickly and easily. typical applications i three-phase power conversion equipment with front-end six-pulse rectifer (diode or scr) i motor drives, like those used e.g. in pump and fan applications i battery chargers, incl. dc fast chargers for e-cars harmonic flters fn 3416 / fn 3418 ecosine? compact economy line of passive harmonic flters i help to comply with ieee-519, table 10-3 (tdd ) i help to comply with en61000-3-12, table 3 (thd) i support an efficient utilization of elec - trical system capacity i ideal for motor drives with 6-pulse rectifier front-end i same filter for both diode and thyristor (scr) rectifiers technical specifications nominal operating voltage: 3x 380 to 500 vac 10 % (fn 3416) 3x 380 to 480 vac 10 % (fn 3418) operating frequency: 50 hz 1 hz (fn3416) 60 hz 1 hz (fn3418) nominal motor drive input power rating: 4 to 200 kw (fn3416) 5 to 250 hp (fn3418) total harmonic current distortion thid*: according to en61000-3-12, table 3 <10 % @ rated power (with l dc ) <15 % @ rated power (without l dc ) total demand distortion tdd: according to ieee-519, table 10C3 efficiency: >98 % @ nominal line voltage and power high potential test voltage: p ? e 2500 vac (2 sec) protection category: ip20 cooling: internal fan cooling, unregulated overload capability: 1.6x rated current for 1 minute, once per hour ambient temperature range: C25 c to +45 c fully operational +45 c to +55 c derated operation** C25 c to +70 c transport and storage flammability corresponding to: ul 94 v-2 or better design corresponding to: ul508, en61558-2-20, ce (lvd2006 / 95 / ec) mtbf @ 45c/500v (mil-hb-217f): 200 000 hours sccr***: 100 ka approvals * system requirements: thvd <2 %, line voltage unbalance <1 % note: performance specifcations in this datasheet refer to six-pulse diode rectifers. scr rectifer front-end will produce diferent results, depending upon the fring angle of the thyristors. ** i derated = i nominal * (70 c-t amb ) / 25 c *** external ul-rated fuses required. typical electrical schematic (in preparation)
2 emc components > fn 3416 / fn 3418 typical filter performance motor drive with l dc , without harmonic flter motor drive with l dc , with ecosine? fn3416 filter application ecosine? flters are best installed directly at the input of 6-pulse rectifers. it is possible to connect several non-linear loads (e.g. motor drives) in parallel. in this case the rating of the flter must match the sum of the power ratings of drives connected to it. the use of a (built-in) dc-link choke is recommended for best harmonics mitigation performance. if the expected input power exceeds the rating of the largest available flter, and a custom solution is not desired, then two or more flters can be wired in parallel. in this mode of operation, it is recommended to use flters with equal power ratings to ensure proper current sharing. mains fn3416-210-40 (110 kw / 400 vac) non-linear load 1: 30 kw / 400 vac non-linear load 2: 75 kw / 400 vac
3 emc components > fn 3416 / fn 3418 filter* rated load power rated load power power loss** input /output weight @ 400 vac / 50 hz @ 500 vac / 50 hz @ 25 c / 50 hz connections [kw] [kw] [w] [kg] filter selection table fn3416 fn3416-10-44 4 5.5 63 -44 10 fn3416-13-44 5.5 7.5 82 -44 10 fn3416-16-44 7.5 11 105 -44 15 fn3416-24-33 11 15 153 -33 20 fn3416-32-33 15 18.5 294 -33 22 fn3416-38-33 18.5 22 256 -33 25 fn3416-45-33 22 30 306 -33 29 fn3416-60-34 30 37 408 -34 37 fn3416-75-34 37 45 410 -34 43 fn3416-90-35 45 55 493 -35 47 fn3416-110-35 55 75 546 -35 50 fn3416-150-40 75 90 784 -40 86 fn3416-180-40 90 110 817 -40 92 fn3416-210-40 110 132 887 -40 100 fn3416-260-99 132 160 947 -99 125 fn3416-320-99 160 200 988 -99 135 * filter to be selected by system voltage and load (motor drive) power. note: the harmonic flter will reduce rms input current. therefore, flter selection by current rating, as it is common for emc/emi flters, is not recommended. ** calculated power loss at rated load power. filter* rated load power power loss** input /output weight @ 460 vac / 60 hz @ 25 c / 60 hz connections [hp] [w] [kg] filter selection table fn3418 fn3418-8-44 5 41 -44 10 fn3418-11-44 7.5 81 -44 10 fn3418-15-44 10 72 -44 16 fn3418-21-33 15 152 -33 20 fn3418-28-33 20 214 -33 22 fn3418-35-33 25 277 -33 25 fn3418-41-33 30 289 -33 28 fn3418-53-34 40 383 -34 38 fn3418-65-34 50 393 -34 42 fn3418-80-35 60 493 -35 45 fn3418-105-35 75 514 -35 54 fn3418-130-40 100 741 -40 78 fn3418-160-40 125 832 -40 87 fn3418-190-40 150 873 -40 100 fn3418-240-99 200 876 -99 126 fn3418-310-99 250 984 -99 135 * filter to be selected by system voltage and load (motor drive) power. note: the harmonic flter will reduce rms input current. therefore, flter selection by current rating, as it is common for emc/emi flters, is not suitable. ** calculated power loss at rated load power.
4 emc components > fn 3416 / fn 3418 fn3416-260 to -320 fn3418-240 to -310 mechanical data: fn3416-10 to -110 fn3416-150 to -210 fn3418-8 to -105 fn3418-130 to -190
5 emc components > fn 3416 / fn 3418 your local partner: to fnd your local partner within schafners global network, please go to www.schafner.com installation for more detailed information and step by step installation guidelines, please consult the user manual at www.schafner.com or the installation instruc - tions (delivered with each flter). july 2012 fn3416C fn3418C 10 8 13 11 16 15 24 21 32 28 38 35 45 41 60 53 75 65 90 80 110 105 150 130 180 160 210 190 260 240 320 310 a 390 390 390 455 455 455 455 520 520 580 580 700 700 700 700 700 b 185 185 185 250 250 250 250 280 280 280 280 450 450 450 450 450 c 190 190 190 230 230 230 230 248 248 248 248 385 385 385 385 385 e 370 370 370 435 435 435 435 500 500 555 555 665 665 665 665 665 f 140 140 140 200 200 200 200 225 225 225 225 350 350 350 350 350 g 9 9 9 11 11 11 11 11 11 11 11 13 13 13 13 13 j m6 m6 m6 m8 m8 m8 m8 m8 m8 m10 m10 m10 m10 m10 m10 m10 v 25 25 w 6 6 x 12.5 12.5 y 47 47 z 11 11 all dimensions in mm; 1 inch = 25.4 mm tolerances according to: iso 2768-m / en 22768-m dimensions C33 C34 C35 C40 C44 solid wire 16 mm 2 35 mm 2 50 mm 2 95 mm 2 10 mm 2 flex wire 10 mm 2 25 mm 2 50 mm 2 95 mm 2 6 mm 2 awg type wire awg 6 awg 2 awg 1/0 awg 4/0 awg 8 recommended torque 1.5C1.8 nm 4.0C4.5 nm 7C8 nm 17C20 nm 1.0C1.2 nm please visit www.schafner.com to fnd more details on flter connectors. filter connector cross sections
07/2012 en headquarters, global innovation and development center scha?ner group nordstrasse 1 1 4542 luterbach schweiz t +41 32 681 66 26 f +41 32 681 66 30 info@scha ner.com www.scha ner.com sales and application centers china scha?ner emc ltd. shanghai t20-3, no 565 chuangye road pudong new area shanghai 201201 t +86 21 3813 9500 f +86 21 3813 9501 / 02 cschina@scha ner.com www.scha ner.com finland scha?ner oy tynninkuja 7 08700 lohja t +358 19 35 72 71 f +358 19 32 66 10 nlandsales@scha ner.com france scha?ner emc s.a.s. 112, quai de bezons 95103 argenteuil t +33 1 34 34 30 60 f +33 1 39 47 02 28 francesales@scha ner.com germany scha?ner deutschland gmbh schoemperlenstrasse 12b 76185 karlsruhe t +49 721 56910 f +49 721 569110 germanysales@scha ner.com italy scha?ner emc s.r.l. via galileo galilei, 47 20092 cinisello balsamo (mi) t +39 02 66 04 30 45/47 f +39 02 61 23 943 italysales@scha ner.com japan scha?ner emc k.k. mitsui-seimei sangenjaya bldg. 7f 1-32-12, kamiuma, setagaya-ku tokyo 154-0011 t +81 3 5712 3650 f +81 3 5712 3651 japansales@scha ner.com www.scha ner.jp singapore scha?ner emc pte ltd. blk 3015a ubi road 1 05-09 kampong ubi industrial estate t +65 6377 3283 f +65 6377 3281 singaporesales@scha ner.com spain scha?ner emc espa?a calle calndula 93 miniparc iii, edi cio e el soto de la moraleja alcobendas 28109 madrid t +34 618 176 133 spainsales@scha ner.com sweden scha?ner emc ab turebergstorg 1, 6 19147 sollentuna t +46 8 5792 1121 / 22 f +46 8 92 96 90 swedensales@scha ner.com switzerland scha?ner emv ag nordstrasse 11 4542 luterbach t +41 32 681 66 26 f +41 32 681 66 41 sales@scha ner.ch taiwan scha?ner emv ltd. 6th floor, no 413 rui guang road neihu district taipei city 114 t +886 2 87525050 f +886 2 87518086 taiwansales@scha ner.com thailand scha?ner emc co. ltd. northern region industrial estate 67 moo 4 tambon ban klang amphur muang p.o. box 14 lamphun 51000 t +66 53 58 11 04 f +66 53 58 10 19 thailandsales@scha ner.com uk scha?ner ltd. 5 ashville way molly millars lane wokingham berkshire rg41 2pl t +44 118 9770070 f +44 118 9792969 uksales@scha ner.com www.scha ner.uk.com usa scha?ner emc inc. 52 may eld avenue edison, new jersey 08837 t +1 732 225 9533 f +1 732 225 4789 usasales@scha ner.com www.scha ner.com/us to nd your local partner within scha ner?s global network, please go to www.scha?ner.com ? 2012 scha ner group speci cations are subject to change within notice. the latest version of the data sheets can be obtained from the website. all trademarks recognized. scha ner is an iso-registered company. its products are designed and manufactured under the strict quality and environnmental requirements of the iso 9001 and iso 14001 standards. this document has been carefully checked. however, scha ner does not assume any liability for errors or inaccuracies.
|
